DUO

(Download these Technical specifications in the Documentation section above)

EXTERIOR
Colours – white • beige • orchid • anthracite •

Structure - laser-welded load-bearing modular structural frames of thick-walled steel Class (S275JR and S355) EN 10025-2 • Anti-corrosion coating of the steel frame (200μm C2 ISO) • Cassetted floor slabs • Double-sided cladding of the steel structure with concrete board with a density of 1350 kg/m3 22mm type Cementolegno per parvimentazioni Manufacturer BetonwoodTM Italia • Fasteners made of galvanized steel manufacturer HILTITM •

Structural connections module-module - Bolted connection with plates of thick-walled steel Class (S275JR) • Anti-corrosion coating of the steel frame (200μm C2 ISO) and bolts Class (8.8 M14), according to the structural drawings•

Structural connections module-foundation - Welding of Module structure to waiting planks of thick-walled steel Class (S275JR) • Anti-corrosion coating of the steel frame (200μm C2 ISO) monolithed in reinforced concrete foundation according structural drawings •

Walls & Floor – concrete board encasement • low λ stone wool insulation • Airtight seal, vapor barrier membrane •

Roof - concrete board encasement • low λ stone wool insulation • two-layered bitumen waterproofing hydro-insulating roof membrane manufacturer RAVAGOTM (EN13707/2013) • Two-point roof drainage (2.5% incline) through horizontal stainless steel guEers & vertical PVC pipes connected to on-site drainage system, according to technical drawings •

Façade – Contact facade with cement putty with reinforced mesh on a pre-primed surface • Final layer of silicone plaster type CerezitTM CT 74 1mm • Color according to architectural drawings • Ventilated suspended facade with aluminum suspension structure type ETEMTM and composite panel facade boards Manufacturer ETEMTM / SwisspearlTM / KRIONTM, colour according to architectural drawings *(Extra cost) •

Windows & doors – 1m x 2m steel entry door with open/close mechanism •

Sliding positions - ETEMTM E75 /or similar/ hebeschiebe - aluminum joinery with interrupted thermal bridge, triple glazing 4 seasons, argon gas • hardware HAUTAUTM /or similar/ • RAL according to architectural drawings • Installation with self-inflating and waterproofing tape manufacturer IllbruckTM •

Hinged positions - ETEMTM E75 /or similar/ - aluminum joinery with interrupted thermal bridge, triple glazing 4 seasons, argon gas • hardware HAUTAUTM /or similar/ • RAL according to architectural drawings • Installation with self-inflating and waterproofing tape manufacturer IllbruckTM • hinged RAL 9010 MDF interior doors •

INTERIOR

Flooring, walls & ceiling – waterproof luxury vinyl Flooring in Oak finish, Upgrade to natural Pine flooring *(Extra cost) • Interior partition walls with KNAUF dry wall system with built-in acoustic insulation and finished with Latex paint RAL 9010 • stretch ceilings with RAL 9010 PVC membrane •

Lighting – 2700k indirect LED ceiling fixtures in every room•

Baths – vitreous china sink vanity with polished chrome tap, built-in storage • 1m x 0.8m walk-in shower with tile surround, curb, concealed drain, hand shower with concealed rain shower head controlled via single-handle valve in polished chrome, tempered shower glass • wall-hung built-in toilet manufacturer GEBERITTM, with chrome button • mirror •

Storage – Custom EGGERTM chipboard wardrobe with hanging rod, opening shelving and drawers in every bedroom, antre wardrobe • Storage under bed (bed included with furniture pack) •

MECHANICAL

Electrical – Flush-mounted electrical sockets and switches in every room •

Plumbing – Toilet drain DN-110, Shower drain DN 75. Washbasin syphon DN 50 PE/PP •

Heating & cooling, hot water – Wall-hung air-conditioning unit Mitsubishi • electric water heater 100l •

Thermal efficiency - U = 0.21 (walls) • U= 0.20 (roof) • U= 0.20 (floor) • U= 1.10 (windows) •

Weather resistance (≤) – 111 km/h (winds), Upgrade for hurricane wind levels 1-4 at extra cost • 9.0 Richter magnitude (earthquakes) • 300cm (snow) •

WARRANTIES & CERTIFICATIONS

For European Union –

15-year structural warranty and 5 to 15 years on the various non-structural elements. Warranty for all Original Equipment Manufacturer elements not manufactured by WE MODULAR are according to their respective OEM’s warranty T&C’s. All Modules are sold with a technical passport. All Modules carry Conformité Européene (CE) Mark. All raw materials have originated from the European Union. Manufactured in the European Union. • All Modules manufactured according to Eurocode No. 4 and Eurocode No. 8 • CerCficated according to ISO EN 1090 • ISO EN 14001:2015 • ISO EN 1090:1 • ISO EN 1090:2 • Chamber of Builders in Bulgaria
– Ist Group 5th Category • Metal structure with EXC-2 ISO EN 1090:2 Performance Class •

This technical specification was updated on 24/07/2024.

DISCLAIMER: WE MODULAR DESERVES THE RIGHT TO AMMEND ANY/ALL PARTS OF THIS TECHNICAL SPECIFICATION WITHOUT PRIOR NOTICE